6 models of 60 ft flagpole, made in the USA, from $12,720. Rated 90 to 120 mph with a flag flying. Satin aluminum, or clear, bronze or black anodized. Rope outside or hidden inside. We supply and install in 48 states.
Each one made in the USA by Eder Flag. The price is the pole in satin aluminum, one pole; three or more cost less each. Flag, foundation and installation are quoted with it.
| Flagpole | Rope | Width at base | Wall | Rated, flag flying | Satin price | |
|---|---|---|---|---|---|---|
| Heavy-Duty FlagpoleEder Economy Extra Series · ECX60 | Outside, on a cleat | 10 in | .188 in | 90 mph | $12,720 | Get a price |
| Tapered Commercial FlagpoleEder Atlas Series · ECXA60 | Outside, on a cleat | 10 in | .250 in | 106 mph | $16,990 | Get a price |
| Heavy-Duty Internal Halyard FlagpoleEder Deluxe IH Series with M-Winch · ECX60IH | Hidden inside | 10 in | .188 in | 90 mph | $17,160 | Get a price |
| Heavy-Duty Internal Halyard FlagpoleEder Deluxe IH Series with M-Winch · ECXA60IH | Hidden inside | 10 in | .250 in | 106 mph | $21,020 | Get a price |
| Architectural Grade FlagpoleEder Architectural Series · EC60 | Outside, on a cleat | 12 in | .250 in | 120 mph | $21,570 | Get a price |
| Heavy-Duty Internal Halyard FlagpoleEder Deluxe IH Series with M-Winch · EC60IH | Hidden inside | 12 in | .250 in | 120 mph | $26,070 | Get a price |
The wind figure is Eder's published flag-flying rating (steady wind, 1.3 gust factor, ANSI/NAAMM FL 1001-07). We confirm it against your address before quoting.
Black, bronze and clear anodized finishes cost more than satin and hold their look for decades, which pays for itself near salt air.
| Finish | Price | Lowest-priced pole in this finish |
|---|---|---|
| 60 ft satin flagpoleThe standard silver finish and the best value. | from $12,720 | Heavy-Duty Flagpole (ECX60) |
| 60 ft clear anodized flagpoleA hard, sealed silver that holds its look for decades. | from $15,580 | Heavy-Duty Flagpole (ECX60) |
| 60 ft dark bronze anodized flagpoleA deep architectural bronze. | from $16,260 | Heavy-Duty Flagpole (ECX60) |
| 60 ft black anodized flagpoleBlack, the finish most often chosen for a front entrance. | from $16,600 | Heavy-Duty Flagpole (ECX60) |
Outside (external halyard): the rope runs to a cleat you can reach. The 60 ft Heavy-Duty Flagpole starts at $12,720. Right for homes, offices and any site that isn't open to the public.
Hidden inside (internal halyard): the rope runs inside the pole to a winch behind a locking door, so nobody can lower the flag or cut the rope. The 60 ft Heavy-Duty Internal Halyard Flagpole starts at $17,160. Usually the choice for schools, town buildings and anywhere people walk past.
The strongest 60 ft pole is the Architectural Grade Flagpole (EC60), rated 120 mph with a flag flying. Above that, the site gets engineered on its own: tell us the address and we'll size it.
Every address has a design wind speed set by its building code. We check yours before we quote, and we size the pole to it, so the cheapest pole is only recommended when it's rated for where you are.
A 60 ft flagpole stands about level with a 6-storey building, and that's how a flagpole looks right: level with the building behind it, or a little above. It flies a 12' x 18' flag, the size Eder recommends for this height. A bigger flag pulls harder than the pole was built for.
Replacing a pole? Choose the height you had: the old foundation can often be reused.
The sites that most often choose this height. Tap one and we'll start your quote with it.
Every aluminum height from 15 to 80 ft. Above that, see our Mega Poles, steel from 100 to 150 ft.
Tell us roughly what you need. One person reads it and replies with a real number, usually the same day.
All of this goes in your message. You can change anything below, or just add a note.
Your request is in. Someone will come back with a real number, usually the same business day. If it is urgent, call or text (350) 305-3524 (FLAG).