Flagpole installation acrossMaine

Flagpoles in Maine

Portland offices, Bangor hospitals and schools, mill-town main streets and the whole Downeast coast. Maine is the northern end of what we cover, and the footing here goes deeper into the ground than anywhere else we work.

Wind here. Wind is not what decides a pole in Maine. Eder's wind map barely moves across the state: 100 mph along the coast from the Kittery corner through Portland to Bar Harbor, and 90 mph through Lewiston, Augusta, Bangor and everything north of them, Aroostook and the St. John Valley included. What moves is the ground. The footing has to sit below the frost line, the town publishes how deep that is, and the number runs from four feet on the coast to five feet and more inland. On much of the shore the hole stops on ledge long before it gets there. Permitting is the other Maine peculiarity: the state code covers every building here, but only towns above four thousand people are required to enforce it, so in most of Maine nobody will issue you a permit and the code is still yours to meet. The shaft is usually the simple half of a Maine quote. The hole and the paperwork are the half worth talking about.

• The York County corner — 100 mph on Eder's chart at Kittery, York and Ogunquit, the top band in the state. Standard wall covers most of it, so what costs money at this end of Maine is the depth of the dig and the finish that stands up to salt.
• Greater Portland and the Midcoast — 100 mph on Eder's chart from Cape Elizabeth through the city and up past Rockland and Camden. Moderate on paper, but wharf and harbour frontage has nothing upwind of it and gets sized as open exposure, which puts the wall thickness back up.
• The interior valleys — 90 mph on Eder's chart through Lewiston, Augusta, Waterville and Bangor, on ground the hills already shelter. The frost line runs deeper here than on the coast, so the line on the quote that moves is the concrete below grade.
• Downeast and the far north — 100 mph on Eder's chart at Bar Harbor and Eastport, easing to 90 mph across Aroostook and the St. John Valley. Fog sits on this coast for weeks at a time, so anodized finish and stainless or bronze hardware go in as standard. Inland it is frost, snow and ice on the halyard that set the job.

Flying the Maine flag? We sell it, sewn to the state's own design specification and sized to sit under the national flag on your pole. See the Maine flag →

Need taller than 80 ft? We supply steel flagpoles from 100 to 150 ft, made in the USA, for car dealerships, truck stops and other big sites across Maine. 100–150 ft flagpoles in Maine →